Email Notification

Enable and set up the email recipients to receive notification events from Fours service


Overview

Email notifications let you configure per-scope routing rules so that each notification event type has its own enable/disable toggle, a sender identity, recipients (To, and optional Cc and Bcc), and an optional custom template. When an event from Fours matches a scope that is switched on in your saved configuration, and Enable Email Notification is on, an email is automatically sent to the designated recipients.

Configuration

Enable Email Notification

Go to the settings page and open the Notification page. Toggle the Enable Email Notification switch to activate email routing.

While the switch is off, Fours sends none of the emails in the catalog. That includes the manual Notify Contacts action on private offers and the ready-to-accept email to an offer’s contacts. The page then shows the warning “Email Notification is off: every scope below is suppressed, including the manual Notify Contacts action on private offers.”

Email Routing Catalog

The Email Configuration catalog lists every notification scope, organized by category (Offers, Entitlements, Co-Sell, Partners, and so on). It is shown whether or not Enable Email Notification is on. Every category starts collapsed; expand the ones you want to edit.

The Partners category holds the PRM emails, so it appears only when PRM is enabled for your organization, and always in a partner organization. While it is hidden, saving the catalog leaves its rows as they were.

In a partner organization the Notification page is shorter: it has only the Email Configuration and Update History tabs (no Webhooks), the catalog lists only the Partners category, and Enable Expire Soon Offer Workflow Notification isn’t shown.

Two controls sit above the catalog:

  • Send all notification emails from — sets one sender identity for every scope at once, instead of picking a sender per row. It shows the sender every row uses, or Mixed (N senders in use) when the rows differ. Picking a sender asks first: the Apply … to all notifications? dialog says how many rows use a different sender and will be overwritten. Click Apply to all; nothing changes until you click Save. After you apply one of Fours’ own senders, the note Add … to your email allowlist reminds you to allowlist its address, so notifications reach the inbox rather than spam. Copy address copies it for your IT team and then reads Copied; the ✕ dismisses the note.
  • Search notifications… — a box that filters the scopes by name, scope ID, or category, so you can jump to a row without expanding each category.

Every scope row provides the following columns:

ColumnDescription
TriggerToggle to enable or disable the notification scope. The scope name and its raw identifier are displayed.
SenderThe from-identity this scope sends from — a per-scope dropdown that lists Fours’ own senders first, then your organization’s Gmail or verified custom domain. When Fours default is offered, it comes first, tagged Recommended, and sends from no-reply@notification.fours.com. Fours legacy is the address Fours has sent from until now, kept for teams whose email allowlists already carry it. Each option shows its address under its name, and the closed dropdown reads name - address. A row keeps its sender until you change it. Email from either Fours sender arrives under the display name Fours (formerly Suger): an inbox rule that matches its address keeps working, but one that matched the earlier display name needs updating. Use Send all notification emails from above the catalog to set one sender for every scope at once.
RecipientsThe email addresses that receive the notification. The To field is always shown; + Cc and + Bcc reveal on demand and expand automatically when they already hold addresses. Type an address and press Enter or comma to add.
TemplateSelect a custom email template from the searchable dropdown, or choose + New Template to create one inline. When a template is assigned, a three-dot Template actions menu offers Test, View, Edit, and Delete.

Click Save after making changes to persist your configuration.

Email Routing Configuration table in Notification settings

Your edits stay on this page until you click Save. While there are unsaved changes, leaving the page — opening another Settings page or menu item, going back or forward in the browser, opening the template editor, or switching to the Webhooks or Update History tab — first opens Unsaved changes: Your notification settings have changes that are not saved yet. Save has the focus, so Enter saves: it saves your changes and then goes where you were heading. Discard changes drops them and goes on. If that save fails, the dialog stays open: choose Discard changes, or close the dialog, fix the problem and click Save on the page. Closing the dialog (✕, Esc or a click outside) before you choose keeps you on the page with your edits. Reloading or closing the browser tab shows the browser’s own warning instead.

In the Settings app on the Insulin desktop, this page never shows Unsaved changes. Switching to the Webhooks or Update History tab keeps your edits, and + New Template and Edit open the template editor in a new browser tab while your edits stay on the page. But nothing asks before you leave the page, reload it or close the browser tab, so click Save first.

Email an offer’s contacts

Fours reaches the contacts on an offer only through the Offer Notification Contacts rule on a row. Add the rule to each offer email your buyer’s contacts should receive: Pending Acceptance, Accept Offer, Resale authorization active, Notify offer contacts, or Accepted but unpurchased offers digest.

  1. Go to the settings page and open the Notification page.
  2. Find the row in the catalog.
  3. In the row’s Recipients column, in the To field, click Add roles, then under Fours select Offer Notification Contacts.
  4. Switch the row on.
  5. Click Save.

Everyone on a row receives the same email. The offer’s contacts and any other TO or CC recipients you add to that row appear together on one message.

Additional Settings

One more setting sits in the same card as Enable Email Notification, above the catalog:

  • Enable Expire Soon Offer Workflow Notification — Enables workflow notifications for offers that are about to expire. When it’s on, set Days before expiration to choose how many days before an offer expires the notification is sent (default: 7).

The former Disable Email Notification on Offer Ready setting has been removed. To stop the ready-to-accept or resale-authorization emails, switch off the Pending Acceptance (PENDING_ACCEPTANCE.OFFER) or Resale authorization active (ACTIVE.OFFER) row in the catalog.

Update History

The Update History tab on the Notification page shows an audit log of configuration changes. You can search across all fields and click a row’s detail icon to inspect the full JSON payload of the change.

Custom Templates

Custom email templates allow you to personalize your notification emails with dynamic content and professional layouts. You can create templates that automatically incorporate data from your notification events, making your emails more informative and engaging.

Any scope can have a custom email template assigned to it, replacing the default content. Templates support dynamic variables (for example, buyer name, deal name, and product).

Create New Template

In the routing catalog, find the Template column for any scope row and select + New Template from the dropdown. The full-window New Email Template page opens, with the console’s AI chat beside it. If you have unsaved changes on the Notification page, the Unsaved changes dialog asks first — see Email Routing Catalog. In the Insulin desktop’s Settings app, the page opens in a new browser tab instead, and nothing asks.

New Template option in the Template column dropdown

On the New Email Template page:

  1. Enter a Template name: up to 50 characters, using only letters, digits, spaces, underscores, hyphens, or dots, and not the name of another template.
  2. Check the Event Type. It starts on the row you came from, and it decides which variables the template can use and the example data the preview fills in.
  3. (Optional) Pick a Starter Template to start from one of Fours’ designs. Otherwise a new template opens on Fours’ starter design: the Fours logo, Powered by Fours (formerly Suger), and the line © 2022-{{(now).Year}} Fours. All Rights Reserved., where {{(now).Year}} becomes the current year when the email is rendered. Edit or delete those blocks like any other.
  4. Leave Evaluator Type on Golang Template. JavaScript is offered too, but only Golang templates can be picked in a row’s Template column, and AI editing and checks support Golang templates only.
  5. Design the email: describe it in the chat (Edit a template with AI), or click Edit manually (unlayer) to open the email builder. Preview opens the rendered email.
  6. Keep Use this template for Event Type checked to select the new template on that row when you close the editor.
  7. Click Create. The page becomes the template’s Edit Email Template page, where Save stores later changes.

Click Close to return to the Notification page. Closing before Create asks you to confirm and saves nothing. If Use this template for was checked, the new template is now selected in the row’s Template column; click Save on the Notification page to start using it.

Template creation dialog with the email builder

Edit a template with AI

The template editor — the New Email Template page, or Edit Email Template when you choose Edit in a row’s Template actions menu — opens the console’s AI chat beside it. Describe the change you want, such as a new heading, a different button color, or a table of the offer’s dimensions, and the AI changes the design on the canvas.

  • The canvas is read-only while the AI works, under the notice Insulin is editing — the canvas is read-only until it finishes. Create waits for it too.
  • Nothing is saved until you click Create or Save. To undo one reply, click Restore to before this reply on it in the chat.
  • The AI checks its work against the data a real email of the template’s Event Type carries, and Preview renders the email from the same data: an offer, entitlement or buyer from your organization when the event names one, otherwise example data, marked Sample data.
  • Ask it for a test email, and it sends the saved template, filled with that event’s example data, to your own address or a plus alias of it (me+test@ for me@). Save your changes first: it won’t send a design with unsaved changes. To send a test to anyone else, use the row’s Test action (Test Custom Templates).

AI editing and the checks work on Golang templates only.

When the preview shows an error

If a template can’t be rendered, for example because of a stray {{end}} or a field the Event Type’s data doesn’t carry, the preview still shows it: the template as written, with its merge tags as {{…}} instead of data, under the warning This template has an error, so the preview shows it without data. The warning gives the error and, when the error names a line, that line’s text after Near:. It also says A real email that hits this error is not sent with this template.

In the live preview, Edit manually opens the email builder so you can fix the error; then click Save (Create on a new template). If the preview itself fails to load, it shows only the error.

Use Email Builder

In the template editor, click Edit manually (unlayer) to open the email builder; while it is folded, a live preview of the email takes its place. The email builder provides a comprehensive set of tools to create professional-looking emails:

  • Columns: It allows your users to add columns to your design in order to have a better design arrangement.
  • Button: Add any type of button in your email. You can change colors and styles.
  • Divider: It gives your users appropriate spacing at any point they want in their design.
  • Heading: Add headings (from level 1-6) to the design.
  • Text: Text is a built-in tool so users can add text to their designs.
  • Image: To make your emails attractive, you can add images using this tool.
  • Social: It is a built-in tool that lets users add their social media icons to your design.
  • Menu: Menu is a built-in tool used to create navigation menus.
  • HTML: This tool will give your users room to add custom HTML to the design.

Working with Dynamic Data

Using Single Variables
  1. Pick the Event Type at the top of the template editor. The builder’s merge tags then list the variables a real email of that event carries.

  2. In the text or heading tool, click the Merge Tags button and select the variable you want to insert

    Merge Tags button with variable selection list
Looping Over Lists

To display multiple items from a list:

  1. Add a Columns tool to your template
  2. Click the tag symbol on the Columns tool
    Tag icon button on the Columns tool
  3. Select the list you want to iterate over
    List selection dropdown for the Columns tool
  4. For complex objects in the list:
    • All variables from the list items become available within the Columns block
    • Use them in text tools just like single variables
    List item variables available inside the Columns block
  5. For simple values (strings or numbers):
    • Use the this merge tag to access the current item within the Columns block
    This merge tag for the current list item

Assign Templates to Notification Scopes

Templates are assigned directly in the Email Routing Catalog:

  1. Go to the settings page and open the Notification page
  2. Find the scope you want to customize in the routing catalog
  3. In the Template column, select an existing template from the searchable dropdown or choose + New Template to create one
  4. When a template is assigned, open the three-dot Template actions menu to:
    • Test the template (see Test Custom Templates)
    • View a rendered-HTML preview of the email in a sandboxed iframe
    • Edit the template in the full-window template editor
    • Delete the template (removes it from all scopes that reference it)
  5. Click Save to persist your changes

Test Custom Templates

Before using a template in production, you can test it to ensure it works as expected:

  1. In the routing catalog, find the scope row with the template you want to test
  2. Open the row’s three-dot Template actions menu and choose Test, its top item
  3. In the test dialog, fill in:
    • Sender: the identity the test is sent from. It starts on the row’s own sender; pick Fours default, Fours legacy, or one of your organization’s senders to see the email as it would arrive from there.
    • To Email: the recipient of the test.
    • CC Emails and BCC Emails (optional): type an address and press Enter to add it.
    • Event Source: Use MOCK Notification Event for a sample event file, or Use REAL Notification Event for one of your organization’s recent events.
    • Event Data: pick the event. You can edit its JSON before you send.
  4. Click Send.
Test dialog with recipient email and event JSON data

What the test looks like depends on the event. When the event names an offer, entitlement or buyer that exists in your organization, as a real event usually does, Fours renders the test exactly as it would render the notification: it loads that record and fills the template and the subject line from it. A mock event names no record in your organization, so its test is rendered from the event’s own fields only. Either way, every test email’s subject begins with (Fours Test), so you can tell a test from a real notification.

To change the template itself, open it in the template editor from the row’s Template actions menu (Edit).

Test a scope’s default template

You no longer need a custom template to use Test. If a scope has no template assigned, the test sends that scope’s default template — the same content Fours would send in production — so you can check the wording and the event data a scope produces before deciding whether it needs customizing at all.

The partner-facing scopes (Partnership, Co-Sell, Commission, Certificate and Journey) render the production partners template, so what you receive is what your partners receive.

One exception: Product scope notifications are plain-text emails with no default template behind them. Test is disabled on that row, with the tooltip “This scope’s notifications are plain-text emails — assign a custom template to test.” Assign a custom template to that scope and the button becomes available.

Notification Scope Reference

Each notification scope has its own trigger, its own TO/CC/BCC recipient lists, and an optional custom template that replaces the default content. Use the tables below to understand when each scope fires and what its default email contains.

Keep in mind:

  • No row is always on — Co-sell shared, Co-sell closed won, Co-sell closed lost, Commission terms updated, and the commission rows can all be switched off like any other row.

  • Notices without a row — these have no row, so they can’t be switched off one by one:

    • The email to a partner that a co-sell was registered on its behalf
    • The email to a partner removed from a deal registration
    • Certificate expiry and renewal reminders sent to learners

    Enable Email Notification still applies to them.

  • A row takes effect only once it is saved — see When an email is sent.

Offers

ScopeWhen it firesDefault email content
Create Offer
CREATE.OFFER
A new private offer is created in your organizationOffer name, buyer, product, pricing, expiry date, link to the offer
Offer Creation Failed
CREATE_FAILED.OFFER
A private offer fails to be created on the cloud marketplaceFailure reason (the offer’s error details) and a link to the offer in the Fours console so your team can fix and resubmit
Accept Offer
ACCEPT.OFFER
A buyer accepts a private offer. The offer’s contacts receive this email only if the row is switched on and has the Offer Notification Contacts rule. See Email an offer’s contacts. Not sent when the acceptance is more than 14 days old, and a repeat for the same offer within a day of the last one is droppedOffer name, buyer details, acceptance timestamp
Expire Offer
EXPIRE.OFFER
A private offer has passed its expiration date without being accepted. Not sent when the offer expired more than 14 days ago, and a repeat for the same offer within a day of the last one is droppedOffer name, buyer, expiry date
Update Offer
UPDATE.OFFER
An existing offer is modified (e.g. pricing, expiry, terms)Offer name, summary of what changed
Delete Offer
DELETE.OFFER
A private offer is deletedOffer name, deletion timestamp
Cancel Offer
CANCEL.OFFER
A private offer is cancelledOffer name, cancellation details
Submit Approval Request
SUBMIT_APPROVAL_REQUEST.OFFER
A team member submits an offer for internal approval reviewOffer details, submitter name, link for the approver to act
Review Approval Request
REVIEW_APPROVAL_REQUEST.OFFER
An offer approval request is ready for a reviewer to act onOffer details, approve/reject CTA
Pending Acceptance
PENDING_ACCEPTANCE.OFFER
An offer has been sent to the buyer and is awaiting their acceptance. The offer’s contacts receive this email only if the row is switched on and has the Offer Notification Contacts ruleMarketplace-specific template (AWS/Azure/GCP/Snowflake/Oracle) with offer details and a direct acceptance link
Resale authorization active
ACTIVE.OFFER
An AWS resale authorization (CPPO) finishes creation and becomes active. Add the Offer Notification Contacts rule to email the offer’s contactsSubject: Your Resale Authorization is Active. Steps for the channel partner to view the resale authorization in AWS Marketplace, with the product, AWS offer, channel partner, and resale authorization details
Notify offer contacts
NOTIFY_CONTACTS.OFFER
Someone clicks Notify Contacts on a private offer. The row’s Offer Notification Contacts rule resolves to the contacts picked in the dialog; the console shows the rule filled in on a row you haven’t saved yet. Switch the row off to turn off the action’s emailFollows the offer’s state: the ready-to-accept email for an offer pending acceptance, the resale-authorization email for an active AWS resale authorization, otherwise a general offer update
Pending Partner Action
PENDING_PARTNER_ACTION.OFFER
An offer requires action from a channel partner (e.g. a CPPO step)Offer name, required action, link
Accepted but unpurchased offers digest
NOTIFY.UNPURCHASED_OFFERS
One email per Azure private offer that meets all three conditions: it is currently accepted, it was created during the default 14-day reporting window (which ends one hour before the check), and it has no entitlement yet. Sent only when Enable Unpurchased Azure Offer Report is on and Treat Accepted Offers as Purchased is off in your Azure integrationSubject: Your Azure Private Offer is waiting for purchase. Its audience is the Offer Notification Contacts rule; add the rule to the row if it isn’t there

Entitlements

ScopeWhen it firesDefault email content
Create Entitlement
CREATE.ENTITLEMENT
A buyer subscribes and a new entitlement is createdBuyer, product, subscription start date, pricing
Reinstate Entitlement
REINSTATE.ENTITLEMENT
A previously suspended or cancelled entitlement is reinstatedEntitlement name, buyer, reinstatement date
Suspend Entitlement
SUSPEND.ENTITLEMENT
An entitlement is suspended (typically due to a payment failure)Entitlement name, buyer, suspension reason, recommended next step
Pending Cancel Entitlement
PENDING_CANCEL.ENTITLEMENT
An entitlement has been scheduled for cancellationEntitlement name, buyer, scheduled cancellation date
Cancel Entitlement
CANCEL.ENTITLEMENT
An entitlement is fully cancelledEntitlement name, buyer, cancellation timestamp
Update Entitlement
UPDATE.ENTITLEMENT
An entitlement’s attributes are updated (e.g. seat count, pricing tier)Entitlement name, buyer, summary of changes
Meter Entitlement
METER.ENTITLEMENT
A usage metering record is submitted against an entitlementEntitlement name, buyer, metered dimension, reported usage amount
End Soon Entitlement
END_SOON.ENTITLEMENT
An entitlement is approaching its end dateEntitlement name, buyer, days until end date
Terminate Entitlement
TERMINATE.ENTITLEMENT
An entitlement is terminated (hard stop, distinct from cancellation)Entitlement name, buyer, termination date
Renew Entitlement
RENEW.ENTITLEMENT
AWS Marketplace creates the next agreement in a pre-authorized auto-renewal chainEntitlement name and confirmation that the agreement renewed
Auto Renew Off
AUTO_RENEW_OFF.ENTITLEMENT
AWS Marketplace reports that auto-renewal was turned off for an agreementEntitlement name and the renewal opt-out lifecycle update
Renewal Upcoming
RENEW_SOON.ENTITLEMENT
AWS Marketplace reports an upcoming pre-authorized renewalEntitlement name and the upcoming-renewal lifecycle update
Renew_uplift_pending Entitlement
RENEW_UPLIFT_PENDING.ENTITLEMENT
An AWS pre-authorized renewal has a price increase set as a range that you haven’t finalized, and the adjustment deadline is within 30 days. AWS sends no event for this: Fours’ own daily check sends it, at most once per renewal cycle. See Pre-Authorized Auto-RenewalSubject: Action needed: finalize your renewal price uplift: [Entitlement Name]. Asks you to adjust the uplift before the deadline
Headless entitlements digest
NOTIFY.HEADLESS_ENTITLEMENTS
A headless entitlement (one without a buyer-facing signup flow) is created or requires attentionEntitlement name, marketplace, buyer info, link to the entitlement detail

All four renewal scopes are disabled unless you enable the scope and configure recipients. For the three that AWS Marketplace reports (RENEW.ENTITLEMENT, AUTO_RENEW_OFF.ENTITLEMENT, and RENEW_SOON.ENTITLEMENT), repeated delivery of the same lifecycle event is deduplicated for one day. The Auto Renew value shown in the Console, Salesforce, and HubSpot is the buyer’s live accepted-agreement setting; it is not the separate “Renewal Offer” marker used when an offer replaces an existing agreement.

Co-Sell

These scopes cover activity on co-sell referrals shared via cloud marketplace co-sell programs (AWS ACE, GCP, etc.).

ScopeWhen it firesDefault email content
Archive Referral
ARCHIVE.REFERRAL
A co-sell referral is archivedReferral name, cloud partner, archival timestamp
Reject Referral
REJECT.REFERRAL
AWS or Google Cloud rejects a co-sell referral you sharedReferral name, cloud partner, rejection reason
Accept Referral
ACCEPT.REFERRAL
AWS or Google Cloud accepts a co-sell referral you sharedReferral name, cloud partner, acceptance timestamp
Create Referral
CREATE.REFERRAL
A new co-sell referral is createdReferral name, cloud partner, deal details
Create_failed Referral
CREATE_FAILED.REFERRAL
A co-sell referral you submit fails to be created with the cloud partnerSubject: Co-Sell Opportunity Failed to Submit to [Cloud]. Shows the referral’s latest failure reason and, when Salesforce (with the Fours app) or HubSpot is connected, an Open in CRM link to the referral there
Approve Referral
APPROVE.REFERRAL
AWS approves a co-sell referral you shared. Sent alongside Accept ReferralReferral name, approver, timestamp
Update Referral
UPDATE.REFERRAL
A co-sell referral is updated (e.g. deal value, stage, customer info)Referral name and a What Changed table (field, previous value, new value) of the watched fields that changed, such as stage, status, close date, next steps, deal value, and team members. If an update changes none of the watched fields, the default email isn’t sent; a custom template without the What Changed list keeps sending on every update
Pending Acceptance Referral
PENDING_ACCEPTANCE.REFERRAL
A co-sell referral has been submitted and is awaiting cloud partner acceptanceReferral name, cloud partner, submission timestamp
Inbound Referral
INBOUND.REFERRAL
A new inbound co-sell referral is received from the cloud partnerReferral name, cloud partner, customer details
Auto-share report completed
COMPLETE.AUTO_SHARE_TASK
A run of Auto-Share Referrals completes successfullySubject: [Fours Co-Sell] Auto-Share Report for YYYY-MM-DD, the day the run finished. The report gives the run’s start and finish times, how many opportunities it tried to share and how many succeeded or failed, and a row for each opportunity: its CRM opportunity ID (a link to the opportunity in your CRM), its name, the cloud partner’s opportunity ID, whether it was shared, and the failure reason
Auto-share report failed
FAIL.AUTO_SHARE_TASK
A run of Auto-Share Referrals failsSubject: [Fours Co-Sell] Failed Auto-Share Report for YYYY-MM-DD, the day the run finished. The same report as Auto-share report completed

Every referral row except Inbound Referral covers referrals you share with a cloud partner. For a referral a cloud partner shares with you, Inbound Referral is the only email: accepting it (yourself or with Auto-Accept), declining it, and later updates to it send none.

Product

ScopeWhen it firesDefault email content
Create Product
CREATE.PRODUCT
A new product is created in your organizationProduct name, marketplace, creator
Update Product
UPDATE.PRODUCT
An existing product is updatedProduct name, summary of changes
Delete Product
DELETE.PRODUCT
A product is deletedProduct name, deletion timestamp

Partners

These scopes cover activity in Fours’ Partner Relationship Management (PRM) module, including partnership invitations, Fours co-sells, and commission lifecycle events. The category appears in the catalog only when PRM is enabled for your organization, and always in a partner organization.

Co-sell and commission emails thread into a single conversation per deal. Fours sends each one from the first of these that applies:

  1. The Gmail of the signed-in user whose action triggered it, if they have connected Gmail as a user integration
  2. The organization sender chosen in the row’s Sender column: your organization’s Gmail or verified custom domain
  3. Fours’ default sender

Send co-sell emails from your Gmail has the full rules, the exceptions, and a diagram.

The sender decides the subject:

  • Thread subject. Co-sell: [Deal Name] on the share email and Re: Co-sell: [Deal Name] on every email after it, with the event named in the email body.
    • Used when the email comes from Fours’ default sender or from the Gmail of the person who triggered it.
    • A copy that carries a recipient’s personal one-click link always comes from Fours’ default sender, so it uses this subject.
  • Event-specific subject. Used when the email comes from your organization sender, which can’t carry the threading headers.

Both subjects are listed below. When you write inbox rules, use the one that matches how the email is sent.

ScopeWhen it firesDefault email subject
Accept Partnership
ACCEPT.PARTNERSHIP
A partner accepts your partnership invitation[Partner Company] accepted your partnership invitation
Decline Partnership
DECLINE.PARTNERSHIP
A partner declines your partnership invitation[Partner Company] declined your partnership invitation
Accept Sugercosell
ACCEPT.SUGERCOSELL
A partner accepts a seller-initiated Fours co-sellRe: Co-sell: [Deal Name]; from your organization sender: [Partner Company] accepted your co-sell: [Deal Name]
Decline Sugercosell
DECLINE.SUGERCOSELL
A partner declines a seller-initiated Fours co-sellRe: Co-sell: [Deal Name]; from your organization sender: [Partner Company] declined your co-sell: [Deal Name]
Co-sell shared
CREATE.SUGERCOSELL
A co-sell is shared. Your switch controls the share emails that land on your organization’s sideCo-sell: [Deal Name] (starts the thread); from your organization sender: You shared a co-sell: [Deal Name] with [Partner Company] (sharing side) or Co-sell: [Deal Name] — shared by [Sender] from [Sender Company] (receiving side)
Partners — Deal update emails
DEAL_UPDATED.SUGERCOSELL
The seller saves a change to a partner-visible co-sell deal field (target close date, deal value, customer info, contacts, partner needs, notes, next steps, deal-value visibility). Each email shows a previous → new diff of exactly what changed. Intermediate pipeline stage moves never fire this — only Closed Won/Lost email, via their own scopes. Commission-terms changes keep their own notification.

Off by default; enable it to start sending. The toggle governs what you send as the seller — recipients cannot switch these off, since the setting belongs to the org whose edits generate the emails
Re: Co-sell: [Deal Name] (these emails thread into the deal’s co-sell conversation); from your organization sender: [Seller Company] updated co-sell: [Deal Name]
Co-sell closed won
CLOSE_WON_REMINDER.SUGERCOSELL
A party marks its co-sell copy Closed Won. A seller close-won notifies every partner; a referrer close-won notifies only the seller.

Your switch controls the copies that land on your organization’s side
Re: Co-sell: [Deal Name]; from your organization sender: Co-sell closed won: [Deal Name]
Co-sell closed lost
CLOSE_LOST.SUGERCOSELL
A party marks its co-sell copy Closed Lost. Your switch controls the copies that land on your organization’s sideRe: Co-sell: [Deal Name]; from your organization sender: Co-sell closed lost: [Deal Name]
Commission terms updated
COMMISSION_TERMS_UPDATED.SUGERCOSELL
The seller edits partner-visible commission terms on a live co-sell, and the partner is notified. Your switch controls the copies that land on your organization’s sideRe: Co-sell: [Deal Name]; from your organization sender: [Seller Company] updated the commission terms for [Deal Name]
Pending Commission
PENDING.COMMISSION
A commission is created and awaiting seller approvalRe: Co-sell: [Deal Name]; from your organization sender: Commission pending approval: [Deal Name]
Approve Commission
APPROVE.COMMISSION
A seller approves a commission payoutRe: Co-sell: [Deal Name]; from your organization sender: Your commission for [Deal Name] has been approved
Payment Sent Commission
PAYMENT_SENT.COMMISSION
A seller marks a commission payment as sent to the partnerRe: Co-sell: [Deal Name]; from your organization sender: Payment sent for [Deal Name]
Payment Confirmed Commission
PAYMENT_CONFIRMED.COMMISSION
A partner confirms receipt of a commission paymentRe: Co-sell: [Deal Name]; from your organization sender: [Partner Company] confirmed receipt of payment — [Deal Name]
Auto Confirmed Commission
AUTO_CONFIRMED.COMMISSION
A commission is auto-confirmed after the confirmation window passes without actionRe: Co-sell: [Deal Name]; from your organization sender: Commission auto-confirmed for [Deal Name]
Clawback Commission
CLAWBACK.COMMISSION
A commission is reversedRe: Co-sell: [Deal Name]; from your organization sender: Commission reversed for [Deal Name]

Revenue

ScopeWhen it firesDefault email content
Disburse Revenue Record
DISBURSE.REVENUE_RECORD
A revenue record disbursement is processed by FoursDisbursement amount, billing period, product, buyer

Fours Co-Sell

There is no separate row for the people on a Fours co-sell. The share email they receive is governed by the Co-sell shared row (CREATE.SUGERCOSELL) in Partners.

Usage Metering Alerts

ScopeWhen it firesDefault email content
Abnormal Alert Usage Record Group
ABNORMAL_ALERT.USAGE_RECORD_GROUP
An abnormal usage pattern is detected in a usage record groupSubject: [Fours Alert] Abnormal Usage Record Groups Detected — includes the affected entitlement, metric name, anomalous values, and a link to your usage metering dashboard

Integrations

ScopeWhen it firesDefault email content
CRM connection failed
CONNECTION_FAILED.INTEGRATION
A connected integration has lost its authorization and must be reconnected: Salesforce or HubSpot rejects Fours’ token refresh, the Slack workspace connection is no longer there, or the daily check of an Azure Marketplace integration rejects its credential. Sent at most once every 7 days per integration.

The row starts switched off. Switch it on and add recipients to receive it
Subject: [Fours Alert] INTEGRATION connection failed — reauthorize required, with the integration named by its identifier (for example SALESFORCE). Shows the integration, your organization ID and the status OAuth refresh failed — reconnect required, with a button named for the integration (for example Reconnect SALESFORCE) that opens Settings › Integration

Spotted something wrong or out of date on this page? Tell us and we'll correct it.