Set Up and Manage Commission Plans

Commission settings control how much partners earn and under what terms — a referral fee, a reseller margin, a co-sell split, or a finder’s fee.


Overview

Fours gives you two layers to work with:

  • Standard Defaults apply automatically to all partners.
  • Custom Plans override those defaults for specific partners who need different terms.

How Commission Plans Are Applied

When a co-sell is created, the commission terms on its Attribution tab are populated using the following priority order:

Custom Plan → Standard Defaults → Manual

Fours first checks whether the partner has an assigned Custom Plan. If not, it uses your Standard Defaults. If no applicable defaults are available, the revenue share setup falls back to a manual configuration path rather than being automatically populated.

The Four Commission Types

Both Standard Defaults and Custom Plans are organized around the same four commission types:

TypePurpose
Referral FeePays a partner for referring an opportunity to you.
Reseller MarginPays a partner that resells your product directly.
Co-Sell Revenue SplitShares revenue on opportunities you and the partner close together.
Finder’s FeePays a partner for introducing an opportunity with limited involvement beyond the introduction.

You’ll set the same fields below for whichever commission types apply to your partner program.

Understand the Fields

Both Standard Defaults and Custom Plans use the same set of fields for every commission type.

FieldDescription
Revenue Share ModelDetermines how the commission is calculated.
% of Final Transaction: Pays the partner a percentage of the deal value. Use this when commission should scale with deal size.
Fixed Amount: Pays the partner a flat amount regardless of deal value. Useful for programs that pay the same amount for every qualified lead or referral.
Discount off list price: Reseller Margin only. The reseller buys at a percentage off your list price and sets its own customer price, so nothing is paid out. See Reseller Discount off List Price.
Default Rate (%)Percentage used when the model is % of Final Transaction. For example, a 15% rate on a $100,000 deal results in a $15,000 commission.
Payment TriggerDetermines when the commission becomes payable.
On Deal Close: Commission becomes payable as soon as the deal is marked Won.
On Customer Invoice: Commission becomes payable after the customer has been invoiced.
On Payment Received: Commission becomes payable only after customer payment has been received.
Clawback Window (days)Optional number of days during which a paid commission can still be reversed if the deal is canceled or otherwise reversed.
Maximum Commission CapOptional maximum payout regardless of deal size.
Minimum Deal ValueOptional minimum deal amount required before any commission is paid.

Maximum Commission Cap and Minimum Deal Value sit together under Guardrails — optional. There is no renewal commission setting: a plan’s rate applies to every deal of that commission type, renewals included, and saving the page drops a renewal setting stored on an older plan.

Reseller Discount off List Price

Some resellers don’t earn a share of the deal. They buy your product at a discount off your list price and set their own price to the customer. Record that arrangement with the Discount off list price model, which is offered on Reseller Margin only.

When you choose it:

  • The rate field reads Discount (%). Enter a value above 0 and at most 100.
  • Payment Trigger isn’t offered. In its place the form notes that nothing is paid to the partner, because the discount is applied on the partner’s order. The stored trigger is Not Applicable.
  • Clawback Window and the Guardrails fields are hidden, and any values they held are cleared when you save.
  • In the Custom Plans table the plan shows the rate as N% off list.

A discount is informational. Nothing is paid out, so when a deal on discount terms is marked Won, no commission is created: there is no commission lifecycle, no pending commission and no ledger row. The deal shows one read-only line instead of the partner’s cut, for example Reseller discount: 20% off list price (not paid out), on both your side and the partner’s.

Two limits follow from that:

  • A won deal with no commission to track has final terms. Once a partner’s copy is closed Won on a discount (or on any terms that leave nothing to pay), its terms can no longer be edited. Terms that were still missing or to be decided can be set after Won.
  • A discount can’t replace a tracked commission. Proposing new terms after Close-Won can’t switch a deal to a discount, because the commission it already started would be left with nothing to pay.

Set Your Standard Commission Defaults

The Standard Defaults tab is selected by default when you open the Commissions page. These values become your global commission rules and apply to all partners unless a Custom Plan overrides them.

  1. Go to Fours Console, then Partners.

  2. Click Settings at the bottom of the rail, then Commissions.

  3. Open the Standard Defaults tab (selected by default).

    Standard Defaults tab on the Commissions page

  4. For each commission type your program actually uses, fill in the fields as described above in the Understand the Fields section.

  5. Click Save Defaults.

Create a Custom Commission Plan

Use this when a specific partner needs different terms than your defaults — for example, they negotiated a higher margin, or a strategic account gets better payment terms.

  1. Go to Fours Console, then Partners.

  2. Click Settings at the bottom of the rail, then Commissions.

  3. Click the Custom Plans tab, then + New Plan.

    Custom Plans tab with the New Plan button

  4. Give the plan a Plan name and an optional internal Description (not partner-facing).

  5. For each commission type, check the box to enable it for this plan, then fill in its fields the same way as Standard Defaults.

    Custom plan editor with commission types to enable

  6. Click Create Plan.

Assign a Custom Plan to a Partner

Creating a plan doesn’t apply it to anyone. A custom plan sits unused until you attach it to a specific partner, and you do that from the partner’s own record rather than from the Commissions page.

  1. Go to Fours Console, then Partners.
  2. In All Partners, click the partner you want to put on the plan.
  3. In the right-hand sidebar, find the Commercial card. The Commission Plan row shows which plan applies today — Default when none has been assigned.
  4. Click Assign plan.
  5. In the Assign Commission Plan dialog, open the Plan dropdown and choose one:
    • Default (Standard Defaults) — remove any custom plan and fall back to your organization-wide defaults.
    • Any Active custom plan, listed by name. Plans you haven’t activated don’t appear here.
  6. Click Confirm.

The Assign Commission Plan dialog — the plan selector, with the reminder that the change applies to future co-sells only and leaves existing ones untouched

See What a Partner Owes and Is Owed

A partner record has its own Commissions section that reports the relationship in both directions rather than as one blended number:

  • You owe — pending commission you owe that partner.
  • {Partner} owes — pending commission the partner owes you.
  • Paid so far — what has already settled. When money moves both ways, this splits into a paid-by-you figure and a paid-by-them figure.

The table underneath filters by Type, Direction (You pay / You receive), and Currency, with tabs for All, Pending, and Completed.

For how to read and work that section, see Work a Partner Record.

Commission Values on a Fours Co-Sell

The commission types above are the labels you configure your program with. When a commission is attached to a Fours co-sell, the record stores one value from each of these two fixed sets — and these are the exact strings the bulk import below expects.

Commission type

ValueMeaning
Referral FeePaid for referring the opportunity.
Reseller MarginThe margin a reselling partner keeps.
Cosell SplitA revenue split on a jointly closed deal.
Finder FeePaid for the introduction alone.

Payment trigger

ValueCommission becomes payable
On CloseWhen the deal is marked Won.
On InvoiceOnce the customer has been invoiced.
On PaymentOnly after the customer pays.
CustomOn terms agreed for that specific deal.
Not ApplicableNever: set by Fours on a discount off list price, which pays nothing out. The import doesn’t accept it.

Import Historical Co-Sell Referrals

Deals that closed before you started tracking them in Fours can be loaded in bulk, so your commission history is complete rather than starting from the day you switched on.

This lives with your co-sell settings, not on the Commissions page.

  1. Go to Fours Console, then Partners.
  2. Click Settings at the bottom of the rail, then Co-Sell.
  3. Expand Bulk import historical referrals, then click Upload CSV.
  4. Click Download Template to get a file with the correct headers, then fill in one row per deal.
  5. Drag the finished file onto the drop area, or click Choose CSV File.
  6. Review the preview table. Rows with problems are flagged; remove any you don’t want with the trash icon.
  7. Click through to submit. Fours confirms how many rows were queued.

Settings → Partner → Co-Sell — the Auto-accept referrals toggle above the Bulk import historical referrals block and its Upload CSV button

Required columns are Partnership ID, Opportunity Name, Stage, and Customer Company. The template also carries Opportunity Type, Deal Role, customer website / industry / country, close date, deal value and currency, both sides’ owner name and email, CRM opportunity ID, a brief, and a closed-lost reason.

The commission columns are optional. When you use them:

  • Commission Amount is a flat amount in the deal’s currency. If your arrangement was a percentage, work out the figure yourself first — there is no separate commission currency column, because the commission always rides the deal currency.
  • Commission Type and Payment Trigger take the values listed in Commission Values on a Fours Co-Sell above.
  • A discount off list price can’t be imported. It pays nothing out, so there is no historical commission to record.
  • Commission Status marks a won deal’s commission as already settled. Leave it blank and the commission rests as pending.

The Commission Lifecycle After Close-Won

The plan decides what a partner is owed. Once the deal is Won, the commission moves through a fixed sequence that records whether it has actually been paid — and each step belongs to one side of the deal, so neither party can advance the other’s half.

TransitionWho does itWhat it means
PENDING → APPROVEDSellerThe seller accepts the calculated commission as owed.
APPROVED → PAYMENT_SENTSellerPayment has been issued outside Fours; the ledger records it.
PAYMENT_SENT → CONFIRMEDPartnerThe partner confirms the money arrived. This is what closes the loop.
PAYMENT_SENT → APPROVEDPartnerThe partner says the payment did not arrive. Fours records PAYMENT_REJECTED and returns the commission to APPROVED so the seller can re-send.
CONFIRMED → CLAWED_BACKSellerThe deal reversed inside the clawback window, so the commission is reversed too. Only possible after the partner confirmed, and only while the window is open.

Each step emails the side it concerns, and the email’s button opens that recipient’s own copy of the co-sell in the console:

StepWho is emailedThe button
PENDING, the commission is calculatedYou, and the partnerYours: Approve Commission. The partner’s: View co-sell, since only you approve
APPROVEDThe partnerView Commission
PAYMENT_SENTThe partnerConfirm Receipt
CONFIRMEDYouView Commission
PAYMENT_REJECTEDYouReview & Re-send
CLAWED_BACKThe partnerView Commission

A partner’s button goes through your branded partner login page when you have one; see Links in Partner Emails. A partner whose deal you registered on its behalf has no console sign-in, so its emails carry no link to the console; where they ask it to act, the button opens a one-click confirmation page instead.

Changing the terms after Close-Won is a separate, two-sided flow. The seller proposes new revenue-share terms; the commission moves to PENDING_UPDATE_APPROVAL and waits for the partner to approve or reject, which returns it to whichever state it was in before. A seller cannot quietly re-rate a won deal.

Where This Shows Up on a Deal

Once a co-sell is created, its Attribution tab shows the resolved terms — the model, rate, payment trigger, and clawback window that apply — based on the priority order above, below each partner’s attribution card. See Set Each Partner’s Attribution.

Revenue Share tab on a co-sell showing resolved commission terms

Spotted something wrong or out of date on this page? Tell us and we'll correct it.